Replacing The Fuse; Technical Specifications - EuroLite TC-150 Mode D'emploi

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Number of gobos:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Fuse:
Accessory:
OSRAM HCI-T150/NDL PRO 6000h 150W G12
Topspot HIT 150W G-12 6000h 4200K nw
GE CMH 150/T G12 6000h 830 3000K
OMNILUX ODM 150W G-12 6000h 4200K
PHILIPS CDM-T 150W/830 G12 3000K
OSRAM HSD 150/70 G-12 7000K 2000h
EUROLITE DMX Operator 192 Kanal
EUROLITE DMX scan control 192 channels
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 01.06.2007 ©
230 V AC, 50 Hz ~
320 W
3
3-pin XLR
via built-in microphone
1-7 Hz
14 dichroic + white
10 gobos, 5 beam-shapers
315 x 270 x 285 mm
7 kg
: 45° C
a
(steady state): 60° C
B
F 3.15 A, 250 V
No. 91201794
No. 91201797
No. 91201800
No. 91201805
No. 91014045
No. 89101910
No. 70064520
No. 70064525
No. 51860102
No. 51860110
No. 51834001
28/52 00026408.DOC, Version 1.3