Source Menu; Pc Mode Menu System; Pc Position Menu; Displaying Tv Information - Telefunken TF2636X880LU Mode D'emploi

Source Menu

Press " " or " " button and select the sixth icon.
Then press " " or OK button. Source menu appears
on the screen:
In source menu, highlight a source by pressing " " or
" " button and switch to that mode by pressing
" " button. Source options are; TV , DTV/USB , EXT-1 ,
EXT-2 , FAV , HDMI-1 , HDMI-2 , YPbPr or PC-VGA .
Note : Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.

PC Mode Menu System

See "Connecting the LCD TV to a PC" section for
connecting a PC to the TV set.
For switching to PC source, press
on your remote control and select PC input. You can
also use "Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.

PC Position Menu

S e l e c t t h e f i r s t i c o n b y p r e s s i n g "
" " button. PC Position menu appears on the
screen:
A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 27 A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 27
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press OK or " ", " " button.
Warning : Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
Dot Clock
"SOURCE"
button
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
" o r
For adjusting PC picture items, do the following: Press
" " or " " button to select the second icon. PC Picture
menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defi ned in TV picture menu under "Analogue
TV Menu System".
Note : If you set Colour Temp as User, you can defi ne R, G,
B settings manually.
Sound,Feature and Source settings are identical to thesettings
explained in Analog Tv menu system.

Displaying TV Information

Programme Number , Programme Name , Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
INFO button is pressed.
English - 27 -
24.12.2009 10:05:31 24.12.2009 10:05:31