Slideshow Options; Video Playback (Optional); Analogue Tv Menu System; Picture Menu - Telefunken TF2636X880LU Mode D'emploi

Slideshow Options

Pause (YELLOW) : Pause the slideshow.
Continue (GREEN) : Continue with the slideshow.
Previous/Next ( / ) : Jump to previous or next
fi le of slideshow.
Rotate ( / ) : Rotate the picture using up/down
buttons.
RETURN : Back to fi le list.
Shuffle (RED) : Shows the files randomly and
continuous in current folder and
highlighted icon. If during a slideshow the shuffl e mode
is enabled, the next pictures will be chosen randomly
(If the loop function is not enabled, the slideshow will
stop at the end. If the loop function is enabled, after
the slideshow ends, it will start again and again).
Loop (GREEN) : Slideshow goes on continuously and
icon turns the highlighted icon.
Info : Activate the operations bar.

Video Playback (optional)

Play (Red button) : Starts the video playback.
Stop (Blue button) : Stops the video playback.
Pause (OK button) : Pause the video playback.
Rewind (Cursor Left) : Goes backward.
Forward (Cursor Right) : Goes forward.
Menu (M button) : Sets subtitle/Audio.
You can set subtitles by using OK button before
starting the playback or by using M button during the
playback. Press RETURN (Exit) button to switch back
to previous menu.
Note: PIP/PAP mode is not available while in Media
Browser mode.
A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 21 A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 21

Analogue TV Menu System

Picture Menu

Mode
For your viewing requirements, you can set the related
mode option.
P r e s s "
Press " " or " " button to choose from one of these
icon turns the
options: Pixellence (optional) , Cinema , Dynamic
and Natural .
Pixellence (optional)
By selecting PIXELLENCE mode, you can optimize
the TV's video settings and acquire a better quality.
PIXELLENCE mode thus includes contrast, sharpness,
colour enhancement and skin tone correction along
with the skin tone detection.
By using " " or " " button, you can switch to
Pixellence mode. Press OK button to activate
Pixellence.
Select Demo option to start Pixellence demo mode.
Throughout the demo mode, the screen is splitted
into two sections, one displaying the Pixellence active
area; the other displaying the normal broadcast. Press
OK button to quit the demo mode.
Note: PIXELLENCE activation is recommended for
HD (High Definition) or SD (Standard Definition)
contents having low amount of noise. The optimization
of PIXELLENCE will be much more evident while
viewing such contents.
Pixellence option will not be available in PIP/PAP
window.
Brightness/Contrast/Colour/Sharpness/
Hue
Press " " or " " button to select the desired option.
Press " " or " " button to set the level.
Note : Hue option can only be visible when the TV receives
an NTSC signal.
English - 21 -
" o r " " b u t t o n t o s e l e c t M o d e .
24.12.2009 10:05:25 24.12.2009 10:05:25