Source Menu; Pc Mode Menu System; Pc Position Menu - Telefunken TF3250HX847LU Mode D'emploi

Press " " or " " button to select your country. If
you want to exit from A.P.S. function, press the
BLUE button. When you press OK or RED button
for starting automatic tuning, all stored programmes
will be erased and the TV will search for available
channels. During the search, the following OSD will
be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.

Source Menu

Press " " or " " button and select the sixth icon.
Then press " " or OK button. Source menu appears
on the screen:
In source menu, highlight a source by pressing " " or
" " button and switch to that mode by pressing
" " button. Source options are; TV , DTV/USB , EXT-1 ,
EXT-2 , FAV , HDMI-1 , HDMI-2 , HDMI-3 (optional) ,
HDMI-4 (optional), YPbPr or PC-VGA .
Note : Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.
01_[GB]_MB36_MASQUE_HDIDTV-MPEG4_NICKEL7_32847W_3900UK_10067001_50162077.indd 27 01_[GB]_MB36_MASQUE_HDIDTV-MPEG4_NICKEL7_32847W_3900UK_10067001_50162077.indd 27

PC Mode Menu System

See "Connecting the LCD TV to a PC" section for
connecting a PC to the TV set.
For switching to PC source, press "SOURCE" button
on your remote control and select PC input. You can
also use "Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.

PC Position Menu

S e l e c t t h e f i r s t i c o n b y p r e s s i n g "
" " button. PC Position menu appears on the
screen:
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press OK or " ", " " button.
Warning : Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
English - 27 -
" o r
25.12.2009 18:49:21 25.12.2009 18:49:21