Connecting To A Dvd Player; Using Side Av Connectors; Connecting Other Equipment Via Scart - Telefunken TF2636X880LU Mode D'emploi

Connecting to a DVD Player

If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player's instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
"Input Selection" section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use
a component audio cable as illustrated below. When
the connection is made, switch to YPbPr source.
See, "Input selection" section.
• You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Note : These three methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 10 A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 10

Using Side AV Connectors

You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section "Input selection"
in the following parts.
• To listen to the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART sockets. Note that cables
shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device's own
instruction book.
English - 10 -
24.12.2009 10:05:12 24.12.2009 10:05:12