Input Selection; Basic Operations; Operation With The Buttons On The Tv; Operation With The Remote Control - Telefunken TF2636X880LU Mode D'emploi

Input Selection

Once you have connected external systems to your
TV, you can switch to different input sources.
"SOURCE"
• Press button on your remote control
for directly changing sources.
or,
• Select "Source" option from the main menu
by using " " or " " button. Use then " " or
" " button to highlight an input and press " " button
to select.
Note : You can mark desired source options by pressing the
OK button. Therefore, when
only the marked source options will be available (except for
the TV source).

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting
• Press " " button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press " P/CH + " button to select the next programme or
" P/CH - " button to select the previous programme.
Viewing Main Menu
• Press the " M " button to enter main menu. In the main
menu select sub-menu using " P/CH - " or " P/CH + "
buttons and enter the sub-menu using "
" buttons. To learn the usage of the menus,
refer to the menu system sections.
AV Mode
• Press the " TV/AV " button in the control panel on the
TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 11 A01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_26880W_1810UK_10066680_50160569.indd 11
"SOURCE"
button is pressed,
" or "
English - 11 -
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press "V+" button to increase the volume. Press "V -"
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press " P - " button to select the previous
programme.
• Press " P + " button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to
select programmes between 0 and 9. The TV
will switch to the selected programme. To select
programmes between 10 - 1000 (for IDTV) or
10-199 (for analogue), press the numeric buttons
consecutively. Press directly the programme number
to reselect single digit programmes.

Initial Settings

When the TV is turned on for the fi rst time, the menu
for the language selection appears on the screen. The
message "Welcome please select your language!"
is displayed in all language options sequentially in
the OSD.
By pressing the " " or " " buttons highlight the language
you want to set and press OK button.
You can get information about the menu usage by
pressing INFO button. Press INFO button again to
exit the help menu.
After then, "First time installation" OSD will appear
on the screen. By pressing " " or " " buttons, select
the country you want to set and press OK button.
Note: Country selection will not be available for UK. Press
OK to continue.
After then, the active antenna selection OSD appears
on the screen:
By pressing " " or " " buttons, set active antenna
mode as on or off.
24.12.2009 10:05:14 24.12.2009 10:05:14