Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player's instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
"Input Selection" section.
• Most DVD players are connected through
COMPONENT SOCKETS. YPbPr can be used
only when you connect a device that has a YPbPr
output through the PC input with YPbPr to PC cable.
To enable sound connection, use AUDIO IN located
side of the TV (YPbPr cable is not supplied).
• When the connection is made, switch to YPbPr
source. See, "Input selection" section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
Note: These methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting
the related source, see the section "Input selection"
in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder or a VCR to your LCD TV by
using the SCART socket. Note that cables shown in
the illustration are not supplied. Power off both the TV
and the devices before making any connections.
For more information, refer to your device's own
instruction book.
English - 74 -
Headphone
SCART
Camcorder