Specifications - Shindaiwa AHS236S-LW Manuel D'utilisation

Specifications

External dimensions: Length x Width x Height
Masses:
Unit with specified cutting attachment, empty tank
Unit with specified cutting attachment, full tank
Volume: Fuel tank
Fuel:
Oil
Mixing ratio
Cutting attachment:
Type
Cutting length
Pitch
Height
Gear ratio and lubrication:
Engine:
Type
Carburettor
Magneto
Spark Plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD at-
tachment installed)
Recommended engine idling speed
Vibration levels: (ISO 10517) a
Front handle / Rear handle
Uncertainty: K
Sound pressure level: (ISO 10517) L
Uncertainty: K
pA
Sound power level: (ISO 10517) L
Uncertainty: K
WA
These specifications are subject to change without notice.
hv,eq
(=L +K )
pAd pAeq pA
(=L +K )
WAd WAeq WA
Specifications
mm 1749 × 246 × 235
kg 5.9
kg 6.2
mL 440
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10% of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC/FD grade and Shindai-
wa Premium 50:1 oil.
50: 1 part (2%)
Dual action, double sided blade
mm 519
mm 30
mm 20
5.63 reduction and good quality urea-base grease
Air-cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto: CDI system
NGK BPMR8Y
Recoil starter
Automatic Centrifugal clutch
cm³ 21.2
kW 0.71
L/h 0.45
r/min 11000
r/min 3000
m/s² 5.1 / 4.8
m/s² 5.0
dB (A) 94.3
dB (A) 2.5
dB (A) 106.2
dB (A) 2.5
30
AHS236S-LW