Specifications - Shindaiwa T262XS Manuel D'utilisation

Masquer les pouces Voir aussi pour T262XS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications

External dimensions: Length × Width × Height
Mass:
Unit without fuel, cutting attachment and harness (ISO11806-1: 2011)
Unit with fuel, specified cutting attachment, guard and harness
Unit without fuel, cutting attachment, guard and harness
Volume: Fuel tank (full)
Fuel: Gasoline
Oil
Mixture ratio
Cutting attachment:
Nylon line cutting head (Cutting swath)
Thread
Nylon cord size (diameter)
Nylon cord length
Type (Number of cutting teeth)
Specified blade diameter
Specified blade thickness
Blade centre hole diameter
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
Engine: Type
Carburettor
Magneto
Spark plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
2006/42/EC
Vibration (ISO 22867) a
hv,eq
Sound pressure level (ISO 22868) LpAeq
Sound power level (ISO 22868) L
* With nylon line cutting head, ** With metal blade
These specifications are subject to change without notice.
Left handle
Right handle
Uncertainty K
Uncertainty K
WARa
Uncertainty K
Specifications
T262XS
1778 × 340 × 311 mm
6.0 kg
6.9 kg
5.6 kg
600 mL
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10% of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO/CD 13738), JASO FC,FD grade and shindaiwa
Premium 50:1 oil.
50:1 part (2%)
SF400 (430 mm)
Left-handed thread M10×1.25 pitch
2.4 mm
6.0 m
1.36 reduction and good quality lithium grease
Anticlockwise
8750 r/min
Air cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto - CDI system
NGK CMR7H
Recoil starter
Automatic centrifugal clutch
3
25.4 cm
1.04 kW
0.61 L/h
9500 r/min *, 11500 r/min **
3000 ±100 r/min
2
4.1 m/s
2
4.7 m/s
2
1.2 m/s
92.7 dB(A)
1.5 dB(A)
pA
107.9 dB(A)
2.1 dB(A)
WA
28
C262S
1778 × 695 × 497 mm *
1778 × 695 × 445 mm **
6.3kg *, 6.1 kg **
7.8 kg *, 7.8 kg **
5.8 kg
3-cutter blade (3)
230 mm
3.0 m
25.4 mm
2 *,
2 **
3.2 m/s
3.6 m/s
2
2 **
3.8 m/s
*, 4.1 m/s
2
2 **
1.2 m/s
*, 0.8 m/s
93.0 dB(A) *, 93.1 dB(A) **
1.5 dB(A) *, 0.8 dB(A)**
108.0 dB(A)*,
106.3 dB(A)**
2.1 dB(A)*, 1.6 dB(A)**

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

C262sT262txsC262ts

Table des Matières