Filing Equipment And Filing Angles; Ec Declaration Of Conformity - Husqvarna 445 II Manuel D'utilisation

Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct filing angles. We recommend always using a Husqvarna file gauge
to restore the sharpness of the saw chain. The part numbers are given in the table below.
If you are not sure of how to identify what saw chain you have on your chain saw, please visit www.husqvarna.com for
more information.

EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 445 II, 445e II, 450 II, 450e II from 2016's serial numbers and onwards (the year is
clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of
the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
- of June 8, 2011 "on the restriction of the use of certain hazardous substances in electrical and electronic equipment"
2011/65/EU.
The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011, EN 50581:2012.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex VI, have the numbers: 0404/09/2161 - 445 II, 445e II, 0404/09/2162 - 450 II,
450e II.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/068 - 445 II, 445e II, 01/161/067 - 450 II, 450e II.
For information relating to noise emissions, see the Technical data chapter.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
32 – English
TECHNICAL DATA
1157680-38 Rev.4 2018-10-15