Required Tools; Intended Use; Use Restrictions; Installing - Goobay ScreenFlex Mode D'emploi

User's Manual
2.2

Required Tools

Tool
Screwdriver
Phillips screwdriver
Second person
Tab. 15: Required Tools
3

Intended Use

This product is made for mounting flat screens with specific screen sizes,
weights and mounting points, which are summarized in chapter "Specifications",
on a horizontal work surfaces. Another use than described in chapter "Descripti-
on and Function" is not permitted. Neglecting and ignoring these regulations
and safety instructions can cause serious accidents, personal injury and
material damage. Also refer to chapter "Warranty and Liability".
3.1

Use restrictions

Only use in dry interior rooms.
4

Installing

4.1

Preparing

Checking the completeness and integrity
>> Check the packing content by comparing it to the scope of delivery
regarding completeness and integrity.
Ensuring compatibility
Risk of material damage by improper
product combination
>> The specifications of all used products must
match or be within the specified range.
Tab. 16: Ensuring compatibility
20
63496+63497_manual_V4.indd 20-21
4.2
Figure
Tab. 17: Wall mounting
Phillips screwdriver
C
Fig. 12:

Desk Mounting

Fig. 13: Fixing the pole assembly
Desk Mounting
Risk of injury due to inappropriate
ambient conditions
>> Do not install the product to places with
direct sunlight or bright light. This contri-
butes to eye fatigue.
Risk of material damage by inappropri-
ate ambient conditions
>> Keep enough space around product and
to the whole system to ensure proper
ventilation and mobility.
>> Mount only to sufficiently thick and stable
surfaces.
>>
Protect against pressure points.
1. Check the strength and stability of the
surface before installing and do not
damage them.
(Model 63497 only:
2. Assemble the cable guide (C).)
3. Choose a suitable mounting place.
4. Fix the pole assembly (A) by tighte-
ning clockwise.
21
28.05.2018 16:02:47