Gaggenau VP 230 620 Notice D'utilisation page 15

Cleaning the appliance once cooled
1.
Pour a little water (max. 100 ml) mixed with washing-up
liquid on the frying surface so that it is thinly covered.
2. Switch on the appliance. Set the cleaning setting ,.
Leave the dirt to soak for 5–10 minutes.
3.
Clean the frying surface using a scrubbing brush.
4.
Mop up the liquid with a soft sponge and remove. Rub
the frying surface dry with a soft cloth.
Cleaning between uses
Ice cubes are better suited to cleaning the appliance
when hot than water as they cause less splashing and
steam.
1.
Switch off appliance.
2.
Use the spatula to push 4 or 5 ice cubes over the hot
frying surface.
3.
Use the spatula to remove dirt that has begun to
soften.
4.
Switch the appliance on again. Wait until the
appliance has reached the set temperature again
before placing food on the frying surface.
Appliance part/ Recommended cleaning
surface
Frying surface Use a brush and washing-up liquid
to remove greasy residues.
Remove stubborn dirt with our "Wie-
ner Kalk" cleaning powder (article
no. 00311774). Make a paste out of
cleaning powder mixed with water
and use this to clean the surface.
Always wipe the surface in the brush
direction.
Follow the instructions on the
cleaner's packaging.
Frying surface, With the appliance cold, apply our
burnt-on dirt cleaning gel (article no. 00311859)
to stubborn dirt and leave it to work
for at least 2 hours, or overnight for
heavy soiling. Then rinse off thor-
oughly and dry. Follow the instruc-
tions on the cleaner's packaging.
Cleaning and maintenance
Appliance part/ Recommended cleaning
surface
Control panel Soapy water – the cloth must not be
too wet. Dry with a soft cloth.
If acidic substances (e.g. vinegar,
ketchup, mustard, marinades, lemon
juice) are spilled on the control
panel, remove them immediately.
Control knobs The soapy cloth must not be too wet.
Dry with a soft cloth.
9
CAUTION
Damage to the appliance
Do not detach the control
knobs to clean them.
en-us
15