Master Access Modes; Timer Mode (Master Access) - Petsafe Passport PPA19-20558 Manuel D'utilisation

In-Tone: Optional audible tone that sounds when any pet set to Master Access comes in Default factory setting is Off with 10 sound
options available
Out-Tone: Optional audible tone that sounds when any pet set to Master Access goes out Default factory setting is Off with 10 sound
options available

Master Access Modes

There are 4 Master Access Modes: In/Out, In-Only, Out-Only, and Timer
In/Out: The default access mode and allows any programmed pet to enter or exit as they please
In-Only Mode: Allows programmed pet(s) to enter through the Cat Flap but pet(s) cannot exit This is useful if you need to take your pet(s) to the
vet or if you want to keep your pet(s) in at night
Out-Only Mode: Allows programmed pet(s) to exit through the Cat Flap but pet(s) cannot enter
Timer Mode: Allows the other access modes (In/Out, In-Only, Out-Only) to be programmed at specific times of day for pet(s) Four
programmable time slots available with a minimum of two programmed times required
To Change Master Access Mode:
1 To change the Master Access Mode, from Main Menu select Setup > Pet Settings > Master Access
Use right arrow key to select Mode will be displayed at top of Master Access Menu
2 Use right arrow key to scroll through and select desired mode option (In/Out, In-Only, Out-Only, or Timer)
Press left arrow/back key to return to Main Menu
Note: If Timer Mode is selected, Access Times must be set with a minimum of two programmed times required
(see "Timer Mode")

Timer Mode (Master Access)

Timer Mode under Master Access Mode allows you to easily set the Cat Flap to one of the other access options (In/Out, In-Only, or Out-Only) at
specific times of day for all programmed pets This is useful if you want your pets to have a certain access during a specific time period (for example
at night) There are four programmable time slots available with a minimum of two programmed times required The two times are required to
prevent your pet from accidentally being locked out or in
To Set Timer Mode:
1 From Main Menu select Setup > Pet Settings > Master Access
> Mode
2 Press right arrow key to scroll to Timer option to select
3 Once Timer Mode has been selected, Access Time will appear at
bottom of Master Access Menu list Use down arrow key to highlight
Access Time then right arrow key to select
4 The Access Time screen will list four available time slots Press right
arrow key to select first time slot
5 The first line listed on Access Time menu is to select the pet access
mode Use right arrow key to scroll through and select desired pet
access mode: In/Out, In-Only, or Out-Only
6 Use down arrow key to highlight Time Press right arrow key to enter
specific time for your pet(s) to have type of access you just selected
in step 5 After you use arrow keys to enter desired time, press enter
key to accept Press left arrow/back key to return to Access Time
menu screen
7 Use down arrow key to highlight second time slot Press right arrow key
to select Repeat steps 5 & 6 to select pet access mode and scheduled
time for the access Repeat steps for as many times as you want to
schedule Remember a minimum of 2 programmed times are
required but up to 4 time slots are available After you select and enter
desired access options and scheduled times, review the Access Time
menu screen to make sure what you entered is correct
If 2 time slots have NOT been programmed, you will receive
an error screen. The Master Access Mode will then default
back to In/Out Mode.
6 www.petsafe.net