Pet Access (Individual Pet); Pet Access Mode (Individual Pet) - Petsafe Passport PPA19-20558 Manuel D'utilisation

Relearn Pet: Allows Cat Flap to keep a pet's programmed settings if for some reason the pet has to be re-programmed (for example, if replacing
the pet's Passport Key or having a cat microchipped)
™
Remove Pet: Allows a pet who is programmed to the Cat Flap to be deleted with all programmed settings removed

Pet Access (Individual Pet)

Under each individual pet, the Pet Access menu allows the Access Mode, Re-latch Time, In-Tone, and Out-Tone to be changed for that specific pet
To open the Pet Access menu, from Main Menu select Setup > Pet Settings > Pet 'X' (or name of pet) > Pet Access Press right arrow key to
select Under the Pet Access menu are the following options:
Mode: Access mode set for the individual pet which overrides the Master
Access Mode There are five modes: Master (which is the default factory
setting), In/Out, In-Only, Out-Only, and Timer
Re-latch Time: Default Re-latch Time is 2 seconds but can be changed
from 1 second to 60 seconds for each pet and is useful if you have an
older or slower pet If Master Mode is selected as the individual pet access
mode, then the individual Re-latch Time cannot be adjusted
In-Tone: Default is off but 10 tone options are available If Master mode is
selected as the individual pet access mode, then the individual In-Tone cannot be adjusted
Out-Tone: Default is off but 10 tone options are available If Master mode is selected as the individual pet access mode, then the individual Out-
Tone cannot be adjusted

Pet Access Mode (Individual Pet)

The Access Mode can be programmed for each individual pet This allows you to customise access based on each of your pet's needs The Access
Mode options available are:
Master: Under each individual pet, when Master mode is selected, the pet will be programmed to all settings under Master Access including
Access Mode, Re-latch Time, In-Tone, and Out-Tone Master is factory default individual Pet Access Mode
In/Out: Allows a programmed pet to enter and exit as they please
In-Only: Allows a programmed pet to enter but not exit
Out-Only: Allows a programmed pet to exit but not enter
Timer: Allows the other pet access modes (In/Out, In-Only, Out-Only) to be programmed at specific times of day by pet Four programmable time
slots available with a minimum of two programmed times required
To Change Pet Access Mode:
1 From Main Menu select Setup > Pet Settings > Pet 'X' (or name
of Pet) > Pet Access Use right arrow to select
2 Use right arrow key to scroll through Pet Access Modes to select
desired mode: Master, In/Out, In-Only,Out-Only or Timer
Press left arrow/back key to return to Main Menu
Note: If Master Mode is selected, all other setting options under the
Pet's menu will not show on the screen because they cannot be changed
These settings for the pet will default to the ones under Master Access (see
"Master Access") If Timer Mode is selected, Access Times must be set with a minimum of two programmed times required (see "Timer Mode")
www.petsafe.net 9