Basic Operation - Yamaha CDX-497 Mode D'emploi

This manual describes how to operate this unit by using the remote control.
To operate this unit from the front panel, use the corresponding buttons on the front panel.
1
1
Press POWER to turn on the power.
2
)
Press OPEN/CLOSE to open the disc tray, and
load a disc.
OPEN/CLOSE
Notes
● After closing the disc tray by pressing
display shows the following information.
Audio CD
CD
Total number
of tracks
MP3, WMA
(CDX-497 only)

BASIC OPERATION

Label side up.
Disc tray
)
OPEN/CLOSE, the
Total recorded
time of a disc
Total number
of files
2, 3
SYNCHRO
4
3
)
Press OPEN/CLOSE to close the disc tray.
4
Press to start playback.
Playback starts from the first track of the disc
● Additionally, you can close the disc tray by pressing
numeric button or RANDOM, or by pressing the front edge of
the disc tray gently. If the tray is closed in one of these ways,
playback starts automatically; however, the display will not
show the total number of tracks nor the total recorded time of
the disc.
Caution
When the disc tray is open, do not touch the inside gear
wheel. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.
Gear wheel
OPEN/CLOSE
2 3 4
TAPE
SEARCH
OPEN/CLOSE
.
, a
7
En