Remote Control; Follow Me Function - Danby DVAC080F1WDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Mode button: Used to choose the operating
mode: cool, fan, dry and auto.
2. Up and down arrows: Used to adjust the set
temperature and the timer function.
3. Sleep button: Used to set the sleep function.
4. Power button: Used to turn the appliance on or
off.
5. Fan buttons: Used to set the fan speed: low,
medium and high.
6. Lock button: Press this button to lock the remote
control and prevent the settings from being
inadvertently changed.
7. Energy saver button: Used to set the energy
saver function.
8. Timer button: Used to set the auto on and auto
off timer.
9. °C/°F button: Used to change the temperature
scale displayed.
10. Follow me button: Used to set the Follow Me
function.

Follow Me Function

There is a temperature sensor built into the remote
control that will continuously collect the current
room temperature. Keep the remote control with
you and the appliance will automatically adjust the
set temperature based on the current temperature
where you are located.
Press the follow me button on the remote control
to activate the follow me function. The remote will
display the current temperature at its location.
The maximum distance for the follow me feature is
8 meters (26 feet). This feature is available in cool
and auto modes.
1
5
6
10
2
4
3
7
8
9
10