Remote Control; Shortcut Function - Danby DPA120DBAUGDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

REMOTE CONTROL

The remote control functions within a distance of
8 m (26 feet) from the appliance. Reception is
confi rmed by a beep.
1. Power Button: Press to turn the unit on or off.
2. Mode Button: Press to select the desired mode.
3. Fan Button: Press to select fan speed.
4. Sleep Button: Press to start the sleep function.
5. Swing Button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
6. LED Button: Press to turn the LED display on or
off.
7. Timer Off Button: Press to set the Auto-off timer.
8. Timer On Button: Press to set the Auto-on timer.
9. Shortcut Button: Press to set and activate the
short cut function.
10. Up and Down Buttons:
• Used to set the temperature and timer.
• Press and hold both Up and Down buttons for 3
seconds to change the temperature display from
°C to °F.
11. LED Display:
• Shows the set temperature in °C or °F or the
auto-timer settings.
• While on Dry mode shows the relative humidity.
• When on Fan mode shows the room
temperature.
1
2
3
4 5

Shortcut function

• Used to save a favourite setting.
• Set the appliance to the temperature and fan
speed that you would like to set as a favourite.
• Press and hold the Shortcut button for 2 seconds.
• Press the Shortcut button at any point in future to
return to the favourite setting.
• If no favourite is set, pressing the Shortcut button
will cause the appliance to run in Auto mode at
29°C (79°F), with fan speed set to Auto.
9
11
10
8
7
6
(only available on remote):
9