Transmitting - PRESIDENT PM-2010 WP Manuel D'utilisation

2. To stop scanning, press the SCAN button once more.
"SCAN" and "TRIPLE" disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel
until the transmission ends, then resumes scanning after a
3 second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To desactivate Triple Watch from
the scanning mode, press the TRI button. "TRIPLE" disap-
pears from the display.

Transmitting

1. Transmission power can be set to either 5W or 1W.
Press the 1/5W button to make the
change, then the "5W" or the "1W" in-
dicator on the display changes ac-
cordingly.
TX Power will be set to 5W when is changed to 16CH. The TX
Power is able to change to 1 W at 16CH by pressing 1/5W.
2. To transmit, press and hold the PTT key. "TX" appears on
the display.
3. To return to receive, release the PTT key. "TX" disappears
from the display.
• If the PTT key is pressed for more than 5 minutes, "TX"
starts blinking and the transmission ends. The TX time out
tone will sound until the PTT key is released.
• If the battery indicator drops to the 1-mark level on the dis-
play, when the PTT key is pressed, the radio will not trans-
mit and the "TX" icon starts blinking (refer to the description
of the Battery Indicator).
53