Programming A Channel Into Memory; Deleting A Channel From Memory; Scanning - PRESIDENT PM-2010 WP Manuel D'utilisation

"TRIPLE" disappears on the display.
• While in Triple Watch mode, you can change the currently
selected channel using the ▲ or ▼ button.
• A momentary press of the 16/9 button interrupts Triple Watch
mode and remains on 16, or on channel 9 if you press once
more. To return to the previous mode, simply press the but-
ton again.
• It becomes Dual Watch when Triple Watch function is turned
on while CH9 or CH16 is displayed.

Programming a Channel into Memory

Before using the scanning feature, you have to program chan-
nels into memory.
1. Select the channel to enter into memory by pressing the ▲
or ▼ button.
2. Press the MEM button to store the
channel. "MEM" appears on the display.

Deleting a Channel from Memory

1. Select the channel to delete from memory by pressing the
▲ or ▼ button.
2. Press the MEM button. "MEM" dis-
appears from the display.

Scanning

1. To begin scanning the programmed
channels, press the SCAN button.
"SCAN" and "TRIPLE" appear on the
display.
52