Replaceable Plug-In Scales (Option); Valve Manifold With Working Pressure Indication (Option) - WIKA 712.15.160 Mode D'emploi

4. Commissioning, operation

4.3 Replaceable plug-in scales (option)

1. Loosen the clamp clip on the case of
the differential pressure gauge and
remove the cover ring complete with
the lens.
2. Loosen and remove the knurled screw.
3. Remove all three scales, place the
desired scale on top and put them back
in place.
4. Reinsert the knurled screw and tighten
it.
5. Mount the cover ring and lens and the
clamp clips again.

4.4 Valve manifold with working pressure indication (option)

Expansion with a compact valve manifold with pressure gauge connectable via a flange
allows, in addition to the level detection, the measurement of the working pressure at a central
measuring point.
Test connection M20 x 1.5
⊖ shut-off valve
Pressure gauge for working pressure indication (option)
Non-Ex version: Model 212.20.100
Ex version: Models 232.50.100, 232.30.100
Differential pressure gauge models 712.15.160, 732.15.160, optional for hazardous areas



 Clamp clip
 Cover ring
 Knurled screw
 Scales
Working pressure indication
with pressure gauge
Pressure compensating valve
⊕ shut-off valve

EN
15