Sony UP-20 MD Mode D'emploi page 34

3
Select the desired setting by pressing the G or g
button.
Switch the desired setting to green by
pressing the G or g button.
When you want to
See letters or fine images of two or four
reduced images on the video monitor.
Confirm whether the two or four reduced
images captured in the memory are
blurred.
4
Press the MENU button.
The regular screen appears.
Making a printout with white borders
The unit allows you to decide whether or not the images
are printed with white borders.
Note
This setting is also effective for the images which have
been captured.
1
Display the LAYOUT SETUP menu according to
the operations of step 1 described in "Selecting the
memory mode" on page 28.
2
Select SEPARATE by pressing the F or f button.
Position the cursor at SEPARATE by pressing the F
or f button.
34
Making a Printout of Multiple Different Reduced Images
3
Select whether the images are printed with or
without white borders by pressing the G or g
button.
Setting
When you want to
OFF
Print the images without white borders.
Print the images with white borders.
ON
a) F is attached to the type of printout at the printer
4
Press the MENU button.
The regular screen appears.
Switch the desired setting to green by
pressing the G or g button.
operation mode display section on the video monitor.
Example: 4F
Setting
OFF
a)
ON