Creating A Blu-Ray Disc; Creating A Standard Definition Image Quality (Std) Disc That Can Be Played On; Ordinary Dvd Players - Sony HDR-CX300 Mode D'emploi

Creating a Blu-ray disc

You can create a Blu-ray disc with a high
definition image quality (HD) movie
previously imported to a computer
(p. 43).
To create a Blu-ray disc, the BD Add-on
Software for "PMB" must be installed.
Click [BD Add-on Software] on the
installation screen of "PMB, " and install
this plug-in according to the on-screen
instructions.
Connect your computer to the internet

when you install [BD Add-on Software].
Place an unused Blu-ray disc in the disc
 [Create Blu-ray
drive, and click
Disc (HD)] in step 4 of "Creating an
AVCHD disc" (p. 44). Other procedures
are the same as that for creating an
AVCHD disc.
Your computer must support the creation of

Blu-ray discs.
BD-R (unrewritable) and BD-RE

(rewritable) media are available for creating
Blu-ray discs. You cannot add contents to
either type of disc after creating the disc.
Creating a standard
definition image
quality (STD) disc
that can be played on

ordinary DVD players

You can create a standard definition image
quality (STD) disc by selecting movies
previously imported to your computer
(p. 43).

Notes
You may select high definition image quality

(HD) movies as sources. However, image
quality is converted from high definition (HD)
to standard definition (STD). It will take a
longer time for converting the image quality of
the movies than it took to actually record the
movies.
1
Turn on your computer, and place
an unused disc on the DVD drive.
See page 40 for the type of discs you can

use.
If any other software than "PMB" starts

automatically, shut it down.
2
Start "PMB" (p. 39).
3
Click [Calendar] or [Index] on
the left side in the window, and
select the date or folder, then
select the movies.
High definition image quality (HD)

movies are marked with
To select plural movies, hold the Ctrl key

down and click thumbnails.
.
US