User Menu; Setting The Clock; Setting Chronothermostat; Daily Programming - ZANTIA VOLUSA Manuel D'utilisation Et D'entretien

Instructions for use
If the remote control is off because the battery
is missing, the product can be commanded
from the control panel at the top. When replac-
ing batteries, pay attention to the polarity by
following the symbol on the internal compart-
ment of the remote control.
4.3

USER MENU

The following is a synthetic description of the structure of the
user manual. The various items can be accessed by scrolling
the keys (5-6) tab. 5. To enter the menu, press the key (3) tab.
5.
1 - Set clock
01 - day (day of the week)
02 - hours (time of the day)
03 - minutes
04 - day (day of the month)
05 - month
06 - year
2 - Set chrono
01 - enable chrono
01 - enable chrono (on/off )
02 - program day
01 - day chrono (on/off )
02 - start 1 day (time)
03 - stop 1 day (time)
04 - start 2 day (time)
05 - stop 2 day (time)
03 - program week
01 - week chrono (on/off )
02 - start prog 1 (time)
03 - stop prog 1 (time)
04 - Monday prog 1 (on/off )
- - -
10 - Sunday prog 1 (on/off )
- - - continue with prog 2 and prog 3
04 - program weekend
01 - weekend chrono
02 - start 1
03 - stop 1
04 - start 2
05 - stop 2
3 - Choose language
01 - Italian
02 - French
03 - English
04 - German
4 - Standby mode (on/off)
5 - Buzzer (on/off)
6 - Initial load (on/off)
7 - Stove status
Volusa rev.00
4.4

SETTING THE CLOCK

This allows you to set the current time and date. The control
panel is equipped with a lithium battery that allows for 3/5-
year autonomous operation of the internal clock. To modify
the values, from the 03 - Set Chrono menu, using the (5) and
(6) keys fig. 14a scroll the items until "02 - program day",
choose the new values with the keys (1) and (2) fig. 14a, and
confirm by pressing key (3) fig. 14a.
fig. 16 control panel - time and date setting
4.5

SETTING CHRONOTHERMOSTAT

Allows you to enable and disable all the chronothermostat
functions.
fig. 17 control panel - enabling chronothermostat functions
4.5.1

DAILY PROGRAMMING

To enable/disable and set the daily chronothermostat func-
tions.
fig. 18 control panel - daily programming
You can set two operating time slots according to tab. 7,
where the OFF setting tells the clock to ignore the command:
Selection
START 1
STOP 1
START 2
STOP 2
tab. 7 operating time slots setting
4.5.2

WEEKLY PROGRAMMING

To enable/disable and set the weekly chronothermostat func-
tions. Access via the menu: Set chrono -> weekly program ->
See item chap. 4.3
fig. 19 control panel - weekly programming
The weekly programmer is provided with 4 independent pro-
translated from the original text
Description Possible values
activation time time - OFF
deactivation time time - OFF
activation time time - OFF
deactivation time time - OFF
EN
17