Replacing The System Outer Foil And The Inner Blades - Panasonic ES7109 Manuel D'utilisation

Replacing the system outer foil and the inner
blades
system outer foil
inner blade
Replacing the system outer foil
1
Replacing the inner blades
1
2 3
10
once every year
once every two years
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
. Insert the system outer foil by
pushing it downwards until it
clicks.
1. Press the foil frame release
buttons and lift the foil frame
upwards as illustrated.
. Remove the inner blades one
at a time as illustrated.
Do not touch the edges
•
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click as
illustrated.
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self-cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the detergent
cartridge.
1
2
Do not pull hard on the rubber blade protector at the bottom of
•
the cleaning tray. The rubber may come off if you pull hard on it.
It is only necessary to pull it up slightly.
Warning - Do not wash or apply water to the adaptor or self-
•
cleaning recharger. Failure to observe this may cause electric
shock or result in short circuits.
1. Be sure to remove the water
tank and the appliance plug
from the self-cleaning
recharger.
Be careful not to spill the
•
cleaning liquid.
. Gently wipe off any beard
trimmings attached to the
inside of the cleaning tray
with a cloth or tissue paper
dampened with water.
Clean the corners and
•
uneven parts of the cleaning
tray with a cotton swab
dampened with water.