Replacing The System Outer Foil And The Inner Blades - Panasonic ES-LL41 Mode D'emploi

5. Dry the outer foil section, the
shaver, the trimmer, and the
comb attachment completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
6. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each of
the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately five
seconds.
4. Switch off the shaver, and wipe off any excess oil from
the system outer foil with a soft cloth.
Notes
• Be careful not to hit the main body on the sink or any other
object while draining the water.
Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, cracking or discoloration
of the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.
16
PB016461 - ES-LL2141-K551 _(01EN)_08-01-18.indd 16
Replacing the system outer foil and
the inner blades
System outer foil
Inner blades
►Removing the outer foil section
ES-LL41 ES-LL41
Press the foil frame release buttons and lift the
1~3 mm 5~7 mm
outer foil section upwards.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the foil
frame.
2. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Once every year
Once every two years
) and the
2018/8/1 17:25:29