• Do not use the self‑cleaning recharger while droplets or
soap remain on the shaver.
Doing so may change the concentration level or
composition of the cleaning liquid in the cleaning liquid
unit, which may degrade cleaning, sterilization,
lubrication and drying performance. This may also cause
cleaning liquid to spill from the self‑cleaning recharger.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
Clean the system outer foil in the areas
indicated by the circles every time you
use the shaver.
►Cleaning with the long brush
Clean the foil frame, system
outer foil, the main body
and the trimmer using the
long brush.
►Cleaning with the short brush
• Clean the inner blades using
the short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the
blades as it will damage the inner
blades and affect their sharpness.
20
ES-LV97_US.indb
20
Replacing the system outer foil and
the inner blades
system outer foil
once every year
inner blades
once every two years
►Removing the outer foil section
Press the foil frame release buttons and
lift the outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
) to the
) and the system outer foil
2019/06/03
19:21:15