Connection
*1 Not supplied
*2 Speaker impedance: 4 Ω – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for
a wired remote control (not supplied). For details
on using the wired remote control, see "Using
the wired remote control" (page 23).
*5 Depending on the type of car, use an adaptor
(not supplied) if the antenna connector does not
fit.
*
2
See "Power connection diagram" (page 22)
for details.
*
3
*
3
Power amplifier*
For details, see "Making
connections" (page 22).
from a wired remote control
(not supplied)*
4
from a car antenna (aerial)
Subwoofer*
1
1
*5
21
GB