Training; "Count Up; Count-Down; Default Section - Kettler ELYX 5 Mode D'emploi Et Instructions D'entraînement

Training and Operating Instructions
24
GB

Training

The computer is equipped with 10 training programs.
They clearly distinguish in load intensity and duration.
1. Training by power defaults
a)Manual power inputs
• (PROGRAM) "Count Up"
• (PROGRAM) "Count Down"
b)Power profiles
• (PROGRAM) "1" – "6"
2. Training by pulse defaults
Manual pulse defaults
• (PROGRAM) "HRC1 Count Up"
• (PROGRAM) "HRC2 Count Down"
Training by power defaults
a)Manual power inputs
(PROGRAM) "Count Up"
• Press "PROGRAM" until: display: "Count Up" Start trai-
ning, all values count up.
or
• Press "SET": default section
• "Plus" or "Minus": change power.
Start of training all values count up.
(PROGRAM) "Count Down"
•Press "PROGRAM" until: display: "Count Down"
The program counts from an entered value down > 0.
If there is no entry, the training starts in program

"Count Up".

For starting the program, at least one entry for time,
energy or distance is required.
• Press "SET": default section

Default section

Display
: time default "Time"
Time default
• Enter values with "Plus" or "Minus" (e.g. 45:00)
Confirm with "SET".
Display: next menu energy default "Energy"
Energy default
• Enter values with "Plus" or "Minus" (e.g. 1500)
Confirm with "SET".
Display:
next menu distance default "Dist."
Distance default
• Enter values with "Plus" or "Minus" (e.g. 14.00)
Confirm with "SET".
Display: next menu age input "Age"
Age entry
The age entry serves determination and monitoring the
maximum pulse (symbol HI, warning sound, if activated
• Enter values with "Plus" or "Minus" (e.g. 34). From
this, a maximum pulse of 186 is calculated according
to the relation (220 - age).
Confirm with "SET".
Display:
next menu maximum pulse input "Max"