Electrical Installation; Clothing Precautions; Safety Instructions Relating To Installation; Regulations - SOMFY ELIXO SMART io Manuel D'installation

EN

1.5. Electrical installation

DANGER
The installation of the power supply must comply
with the standards in force in the country in which the
motorisation is installed, and must be carried out by
qualified personnel.
The electric line must be exclusively reserved for the
motorisation and equipped with protection, comprising:
• a 10 A fuse or breaker,
• a differential type device (30 mA).
An all-pole power supply cut-off device must be provided.
The switches provided to ensure a cut-out of all poles on
fixed appliances must be connected to the power supply
terminals and there must a separation between the contacts
on all poles to ensure complete disconnection in conditions
where category III high impulse voltage is present.
It is recommended that you fit a lightning conductor
(mandatory maximum residual voltage 2 kV).
1.5.1. Cable feed
DANGER
Underground cables must be equipped with a protective
sheath with a sufficient diameter to contain the motor
cable and the accessories cables.
Low-voltage cables subject to inclement weather must be at
least of type H07RN-F.
For overground cables, use a cable grommet that will
withstand the weight of vehicles (ref. 2400484).

1.6. Clothing precautions

Take off any jewellery (bracelet, chain, etc.) during installation.
For manoeuvring, drilling and welding operations, wear
appropriate protection (special glasses, gloves, ear protection,
etc.).

1.7. Safety instructions relating to installation

DANGER
Do not connect the motorisation to a power source before
installation is complete.
WARNING
Modifying any of the components in this kit or using
additional components not recommended in this manual
is strictly prohibited.
Monitor the gate as it moves and keep people away from it
until installation is complete.
Do not use adhesive to secure the motorisation.
WARNING
Take care when using the manual unlocking device.
Manual unlocking may result in uncontrolled movement
of the gate.
ATTENTION
Install any fixed control device at a height of at least 1.5 m
and within sight of the gate, but away from moving parts.
After installation, ensure that:
• the mechanism is correctly adjusted,
• the manual unlocking device is operating correctly,
• the motorisation changes direction when the gate
encounters an object 50 mm high positioned halfway up
the leaf.
3
1.7.1. Safety devices
WARNING
For operation in automatic mode or remote control,
photoelectric cells must be installed.
The automatic motorisation operates in at least one
direction with no intentional activation by the user.
For operation in automatic mode or if the gate faces a public
road, installation of an orange light may be required in
accordance with the regulations in the country in which the
motorisation is commissioned.

1.8. Regulations

Somfy declares that the product described in these instructions,
when used in accordance with these instructions, complies
with the essential requirements of the applicable European
directives and, in particular, with the Machinery Directive
2006/42/EC and the Radio Equipment Directive 2014/53/EU.
The full text of the EC declaration of conformity is available at
the following website: www.somfy.com/ce.
Antoine CREZE, Head of Regulations, Cluses

1.9. Assistance

You may encounter difficulties or have questions when
installing your motorisation.
Do not hesitate to contact us; our specialists are on hand to
answer all your questions. Internet: www.somfy.com
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.
Elixo Smart io