Krüger & Matz KM1663.1 Mode D'emploi page 26

TRoUBLeSHooTING
If you are having a problem with your system, check this list for a possible solution
before calling for service. If you can not solve the problem from the hints give here, or
the system has been physically damaged, call a qualified person, such as your dealer,
for service.
No power
• Ensure that the AC power plug of the
unit is connected properly.
• Ensure that there is power at the AC
outlet.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Remote control does not work
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-
signs) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the
sensor on the front of the unit.
Clock timer setting erased
• Power has been interrupted or the
power cord has been disconnected.
• Reset the clock/timer.
26
Poor radio reception
• Increase the distance between the unit
and your TV or VCR.
• Fully extend and adjust the FM antenna.
Bluetooth device cannot connect
with kM1663.1
• The device does not support the profiles
required for the system.
• The Bluetooth function of the device is
not enabled.
• The system is not in the pairing mode.
• The system is already connected with
another Bluetooth device.
• Disconnect that device or all other
connected devices and then try again.
The audio quality is poor after
connection with a Bluetooth device
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Owner's manual