Krüger & Matz KM1663.1 Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Owner's manual
CoNNeCT
Connecting the FM aerial
1. Connect the FM antenna to FM
radio socket at the back of the unit.
2. If connection is poor, connect the
outside antenna.
Caution: To avoid noise, keep antennas
away from the system, the connecting
cord and the AC power cord.
Connecting external device
Connect an AUDIO IN (RCA) cable to:
• the AUDIO IN (L&R) sockets on this
unit.
• the audio output sockets on the
external audio device.
Connecting Speakers
1. Hold down the socket flap.
2. Insert the stripped part of the wire
completely.
• Insert the right speaker wires to
"R", left speaker wires to "L".
• Insert the red speaker wires to
"+", black wires to "-".
3. Release the socket flap.
Connecting Auxiliary equipment
Connect an AUX IN (3,5 jack) cable to:
• the AUX IN socket on this unit.
• the headphone socket on the
external audio device
21

Publicité

Table des Matières
loading

Table des Matières