Dolomite® Futura™ / Dolomite® Symphony™
For desirable braking strength, adjust the brake wire.
Suitable tools: 8 mm and 10 mm spanner (not included).
The wire can be adjusted in two places - above
under the brake handle or below above the brake
clamp. The brake handle must be in neutral position.
1. Loosen the counter nut and turn the hexagon nipple
counter clockwise in order to increase the braking
effect. The distance between the brake clamp and the
wheel should be 2 mm.
2. Tighten the counter nut again to fixate the new
adjustment.
3. Check the braking effect by engaging the parking brake
and check that the wheel can´t rotate.
WARNING!
– Make sure to tighten the counter nuts after
adjustment.
4.9 Accessories
Accessories are not standard on all models. For a list of
available accessories, contact your authorized dealer or the
Invacare representative (see rear page of this manual).
Basket
Mount the basket by hanging it with the hooks on the front
frame.
Tray
Secure the tray by using the plastic plugs.
14
1543649-D