Introduction; How To Keep This Manual; Declaration Of Conformity; Identification Data - Nilfisk ALTO Manuel D'utilisation

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
The purpose of this Manual is to provide the operator with all the information to get the best performances from Nilfi sk Alto Floortec
480M.
Before operating the machine, read carefully the following information.
The machine here described is intended for commercial use only.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.

DECLARATION OF CONFORMITY

The declaration of conformity, supplied with the machine, certifi es the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.

IDENTIFICATION DATA

The machine Model and Serial Number are shown on the plate on the machine itself.
The machine model year is written in the declaration of conformity and it is also indicated by the fi rst two fi gures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identifi cation data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................

OTHER REFERENCE MANUALS

– Spare Parts List (supplied with the machine)

SPARE PARTS AND MAINTENANCE

Any repair must be performed at authorised Nilfi sk Alto Service Centers by qualifi ed personnel, which will use original spare parts
and accessories. Contact your Nilfi sk Alto Dealer for any repair or service, and specify your machine model and serial number.

CHANGES AND IMPROVEMENTS

Nilfi sk Alto constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefi ts to the machines that were sold previously.
Any change and/or addition of accessory must be approved and performed by Nilfi sk Alto.

UNPACKING/DELIVERY

Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep
the whole packing to have it checked. Contact your Nilfi sk Alto Dealer immediately to fi le a freight damage claim.
Remove the sweeper from the packing, loosen the knobs (2) and unfold the handlebar (1). Tighten the knobs to fasten the
handlebar.

IMPORTANT SAFETY INSTRUCTIONS

This machine is intended for commercial use only, i.e. hotels, schools, factories, shops and offi ces, that is to say that it is not
intended for domestic use.
Read all the instructions before use.
2
USER MANUAL
FLOORTEC 480M 1464361000(1)2009-11 A