Media Xpander Function; Setting The Mx Mode; Bass Engine Function; Setting The Bass Engine - Alpine IVA-D310 Mode D'emploi

Masquer les pouces Voir aussi pour IVA-D310:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

i-Personalize™

Media Xpander Function

Setting the MX mode

To display the i-Personalize mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the i-Personalize mode operation has
been released. Engaging the parking brake can reactivate the i-
Personalize mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above procedure (1
through 3), of "To display the i-Personalize mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the i-Personalize mode screen."
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The radio, CD, and MP3, will be able to
reproduce the music clearly even in cars with a lot of road noise.
1
Touch [SETUP] on the source main screen.
The SETUP selection screen is displayed.
2
Touch [i-Personalize].
The screen changes to the i-Personalize.
3
Touch [OFF] or [ON] of MEDIA XPANDER to turn MX
ON or OFF.
OFF: MX mode is canceled for all music sources.
ON:
The selected MX mode is turned on.
4
After setting to ON, touch [
The screen changes to the Media Xpander setting screen.
5
Touch [ ] or [ ] of the desired MX mode.
The level of the audio source can be adjusted.
MX CD (OFF, CD MX 1 to 3)
The large quantity of uncompressed CD data is processed to
reproduce the sound with more clarity.
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3) / MX SAT (OFF,
SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
].
(DVD MUSIC)
This disk contains a large quantity of data such as a music
clip. MX uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
6
Touch [RETURN] to return to the previous screen.
• When OFF is selected, MX effect of each MX mode will be off.
• Each music source, such as radio, CD and MP3 can have its own MX
setting.
• AUX is displayed when ON is selected in "Setting the AUX Mode"
(page 34).
• MX mode does not function for AM radio, NAV. mode when MX is
ON.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD, iPod.
• If the unit is connected to an audio processor with the MX function,
such as PXA-H700, etc., the MX processing can be applied to the
audio processor. In this case the audio processor needs to be
adjusted. For details, refer to the Owner's Manual of the audio
processor.
• This function is inoperable when Defeat is set to ON.
• The MX setting function is applied for Pre-out output.

Bass Engine Function

Setting the Bass Engine

The following steps 1 to 6 are common operations to each
"Setting item" of bass engine Setup. Refer to each section for
details.
1
Touch [SETUP] on the source main screen.
The SETUP selection screen is displayed.
2
Touch [i-Personalize].
The i-Personalize screen appears.
3
Touch [
] of BASS ENGINE.
The screen changes to the Bass Engine setting screen.
4
Touch [ ], [ ] or [
setting item.
Setting items
BASS MAX EQ / P-EQ / BASS FOCUS / T.CORR
(TIME CORRECTION) / X-OVER / SUBWOOFER
5
Touch [ ], [ ] or the adjusted screen of the
selected setting item, and change the setting.
• When setting is complete, storing in memory is recommended.
6
Touch [RETURN].
The screen returns to the previous one.
] of the desired Bass Engine
37
-EN

Publicité

Table des Matières
loading

Table des Matières