Alpine IVA-D310 Mode D'emploi page 82

When Connecting External Equipment
IVA-D310
Tuner BOX
EQ/DIV
NORM
POWER SUPPLY
REMOTE IN / OUT
NAVIGATION IN
DISPLAY OUT
(White/Pink)
* Connect this to the touch panel-compatible rear monitor.
(White/Brown)
(White/Brown)
(Orange/White)
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Remote IN/OUT Terminal
CAMERA Input Terminal
Use when connecting a back-up camera.
AUX Video/Audio Output Terminal
Use when connecting an optional monitor etc.
AUX Video/Audio Input Terminal
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
80
-EN
SUBW.
PRE IN/OUT REAR
FRONT
Ai-NET
EXT.OUT
AV SELECTOR
CAMERA IN
AUX OUT
VIDEO
(MONO)
L
AUDIO
R
AUX IN
RADIO ANTENNA IN
M.CONT
REMOTE OUT
REMOTE IN
REVERSE
To Audio Input terminal
To Video Input terminal
To Video Output terminal
To Video Output terminal
To Audio Output terminal
M.CONT (White/Pink)
REMOTE IN (White/Brown)
REMOTE OUT (White/Brown)
Use only when back-up camera is connected.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect to the plus side of the car's reverse lamp
which lights when the transmission is shifted into
reverse (R).
Switches the video picture to the back-up camera.
This is linked to putting the car into reverse (R).
RCA Extension Cable (Sold separately)
Rear monitor
(Sold Separately)
Back-up camera
(Sold Separately)
TV Tuner or VCR
(Sold Separately)