Possible Causes - Smeg BCC01 Manuel De L'utilisateur

What to do if......
Problem
The appliance does not
work.
The machine stops
during dispensing.
The coffee comes out of
the dispenser slowly.
The coffee comes out
of the dispenser too
quickly.
The coffee is not hot.

Possible causes

Plug not inserted.
ON/OFF button not
pressed.
Descaling alarm activated
(LED 25 flashes).
Full grounds container
alarm (LED 23
Infuser alarm missing or not
correctly assembled (LED
24 ).
Empty or missing tank
alarm (LED 21
No coffee alarm (led 22
).
Tank not inserted or empty.
Ground coffee too fine.
Clogged dispenser spout.
Ground coffee too thick.
Worn grinders.
Machine inactivity for a
prolonged time.
Solution
Insert the plug.
Press the button to start the
machine.
Perform descaling.
Empty the grounds container.
).
Check that the infuser
and its door are correctly
assembled.
Make sure that the tank is
correctly inserted or fill it with
).
water.
Pour some coffee beans into
the container.
Make sure that the tank is
correctly inserted or fill it with
water.
Increase the coffee grain
using the relative knob.
Warning: adjust the grinder
only when it is operating,
in order not to damage the
grinding unit.
Clean the dispenser spout.
Decrease the coffee grain
using the relative knob.
Contact an authorized
service centre.
Using the same cup in which
the coffee will be prepared,
dispense hot water to heat
the cup.
EN - 15