Smeg BCC01 Manuel De L'utilisateur page 13

Description / Assembly / Controls
DESCRIPTION OF THE APPLIANCE
(Fig. A)
1
Machine body.
2
Coffee bean container lid.
3
Coffee bean container.
4
Water tank cover.
5
Water tank (1,4 l).
6
Grinding selection knob.
7
Grinders protection.
8
Brewing group access door.
9
ON/OFF button.
10 Control panel.
11 Height adjustable coffee dispenser.
12 Coffee grounds container.
13 Internal drip tray.
14 External drip tray with level indicator.
15 Brewing group.
EN - 8
IDENTIFICATION PLATE
The identification plate states the technical
data, serial number, and marking.
The identification plate must never be removed.
BEFORE FIRST USE
(Fig. A)
• Unpack the appliance carefully and remove
all packaging materials.
• Rinse the removable components with
lukewarm water, such as: water tank (5)
covers (2,4), door (8) grounds container
(12) drip trays (13,14) and brewing group
(15).
B e f o r e u s e , c h e c k t h a t a l l
components are integral and have
no cracks.
ASSEMBLY OF COMPONENTS
(Fig. B)
• Place the machine on a flat surface and fix
the drip tray (14).
• Connect the power supply cable to the
socket on the rear of the machine and the
other end to a power socket.
DESCRIPTION OF CONTROLS
AND ALARMS (Fig. A-C-D)
ON/OFF button (9)
Pressing the button switches the machine on
or off.
Change dispensing program
button (20)
The product has 8 functions, accessible
through two menus, Primary Menu and
Secondary Menu.
By pressing this button it is possible to change
the dispensing menu from "Primary" and
"Secondary" and vice versa.