Hilti PD-I Mode D'emploi page 8

Measure areas and volumes
Select special functions
Select trapezoid function
Select Pythagoras function
Select settings
At least one right angle is required for horizontal and diagonal distances.
Select indirect measuring
No specific angle is required for measurements on non-moving objects such as walls.
Generally applicable symbols
Battery charge state
Measuring spike not folded out
Measuring spike folded out
Measuring
Adding distances
Subtracting distances
Select
Do not select
Select measuring time
Select calculator
Area and volume measurement submenu
Measuring rectangular areas
Measuring triangular areas
Measuring volumes
Measuring cylinder volume
Special functions submenu
Select automatic brightness sensor
Select min/max delta function
Select layout function
Determine painter's area
Select timer
Select offset function
4