Marmitek CONNECT 540 UHD Guide Utilisateur page 5

4. INSTALLATION
Installation tips:
x
Turn off all devices (TV and HDMI sources) before connecting them to
the Connect 540 UHD™. If a device cannot be turned off, please remove
the plug from the socket.
x
Only use High Speed HDMI® certified cables for the best picture and
sound quality. Using too much force to connect or disconnect the HDMI
cables may damage them.
1. Use an HDMI cable to connect the HDMI sources (such as game
consoles, Blu-ray players and Digital TV Decoders) to the HDMI ports
marked "HDMI input".
2. Use an HDMI cable to connect the TV to the HDMI port marked "HDMI
output".
3. Connect the power adapter to the "DC 5V" and insert the plug into the
socket.
4. Pull the plastic strip from the remote control's battery compartment to
activate the battery and remove the protective film from the top.
5. USE
Switching between connected HDMI devices
The Connect 540 UHD™ allows you to choose which HDMI source is
displayed on the TV. If you want to select another HDMI source, please use
the remote control or the "OUTPUT A / B" button on the front.
EDID settings
EDID stands for Extended Display Identification Data and is used for
communication between HDMI sources and screens, enabling you to
determine the supported display resolutions and audio formats. The HDMI
source requests this information from the screen and determines the best
resolution or audio format. When using multiple screens (TVs or projectors),
the best resolution and audio format that is supported by all connected
screens is determined.
CONNECT 540 UHD™
5