Publicité
EN
G
M
§4.2– Impact of rubber platform seals (option S600,
601...)
•
If the standard HTL is to be mounted with a rubber seal kit
between the closed platform and vehicle body, a spacer
with dimension Q must be foreseen between the rear
cross member of the vehicle loading floor, and the fitting
jigs or the vertically mounted platform. [See Fig. 4.4]
Top &
Floor profile
side profile
ø15
Steel, alu or inox
DHOLLANDIA
4.4
Q
32mm with platform
20mm with platform
!
21
Publicité
