Digital Set Up - Sony ESPRIT TAV-L1 Mode D'emploi

Masquer les pouces Voir aussi pour ESPRIT TAV-L1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Digital Set Up*

Displays the [Digital Set Up] menu. You can change/
set the digital settings using this menu.
* Note that this function may not be available in some countries.
1
Press
(OK) to select [Digital Set Up].
2
Press M/m to select the desired icon
below, then press
Digital Tuning
Digital Auto Tuning
Programme List Edit
Digital Manual Tuning
Select:
Enter:
OK
Digital Tuning menu
3
Press M/m to select one of the following
options, then press
Option
Description
Digital Tuning
Tunes in all the available
digital channels.
Digital Auto
Usually you do not need to do
Tuning
this operation because the
channels are already tuned
when the system was first
installed (page 18). However,
this option allows you to repeat
the process (e.g., to retune the
system after moving house, or
to search for new channels that
have been launched by
broadcasters).
1
2
48
GB
(OK).
Exit:
MENU
(OK).
Press
(OK) to start
digital auto-tuning.
When all available digital
channels have been tuned,
a message stating that the
auto-tuning process is
finished appears.
Press <.
Option
Description
Programme
Removes any unwanted digital
List Edit
channels stored on the system,
and changes the order of the
digital channels stored on the
system.
1
Press M/m to select the
channel you want to
remove or move to a
new position.
If you know the channel
number (frequency)
Press the number buttons to
enter the three-digit
programme number of the
broadcast you want.
To display the previous or
next five channels
Press the red button
(previous) or the green
button (next).
2
Remove or change the
order of the digital
channels as follows:
To remove the digital
channel
Press
message that confirms
whether the selected
digital channel is to be
deleted appears. Press ,
to select [Yes], then press
To change the order of
the digital channels
Press ,, then press M/m
to select the new position
for the channel and press
procedure in steps 1 and 2
to move other channels if
required.
3
Press <.
(OK). A
(OK).
(OK). Repeat the

Publicité

Table des Matières
loading

Table des Matières