Timer Menu - Sony ESPRIT TAV-L1 Mode D'emploi

Masquer les pouces Voir aussi pour ESPRIT TAV-L1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timer menu

Timer
Sleep Timer
Clock Set
Timer
Select:
Set:
You can select the options listed below on the Timer
menu. To select options, see "Navigating through
menus" (page 38).
Notes
• When the FM is selected, you cannot set the Timer menu.
• If "AUTO" is set in "Lift Mode," the lift unit moves up
when the system is turned off, or moves down when the
system is turned on by the timer (page 74).
Sleep Timer
Sets a period of time after which the system
automatically switches itself into standby mode.
1
Press
(OK) to select [Sleep Timer].
2
Press M/m to select the desired time
period ([30min]/[60min]/[90min]/
[120min]), then press
The
(Timer) indicator on the lift unit lights up
in amber.
Tips
• You can also set the sleep timer by pressing
repeatedly.
• If you switch off the system and switch it on again,
[Sleep Timer] is reset to [Off].
• [Sleep timer will end soon. Power will be turned off.]
appears on the screen one minute before the system
switches to standby mode. This message does not
appear when the FM is selected.
• If you press
/
, the remaining time in minutes
before the system switches to standby mode is
displayed on the screen.
Clock Set*
* Note that this function may not be available in some countries.
1
Press
(OK) to select [Clock Set].
2
Press m/M to select the day, then press
,.
3
Set the month, year, and hour in the
same way as in step 2.
Off
Fri 20. 8 21:30
Off
Back:
End:
OK
MENU
(OK).
4
Press m/M to select the minute, then
press
(OK).
The clock starts.
Timer*
Sets a predefined period of time after which the
system automatically switches on/off.
* Note that this function may not be available in some countries.
1
Press
(OK) to select [Timer].
2
Press m/M to select [Set], then press
(OK).
3
Press , to select the desired period
([One Day], [Daily], [Mon-Fri] or
[Weekly]), then press
4
Press m/M to select [On Time] or [Off
Time], then press
5
Press m/M to active. Press ,, then
press </M/m/,, to set time you wish to
switch on/off the system. Press
to confirm.
Timer setting is complete. The
indicator on the lift unit lights up in amber.
(OK).
(OK).
(OK)
(Timer)
43
GB

Publicité

Table des Matières
loading

Table des Matières