Work And Safety Instructions; General; Mechanical Safety - Festo 403-1 Notice D'utilisation

5 Work and safety instructions

5.1 General

•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.

5.2 Mechanical safety

•
Switch off the power supply.
–
–
–
•
Risk of injury during troubleshooting.
Use a tool such as a screwdriver to actuate limit switches.
•
Mount all of the components securely on the profile plate.
• Make sure that limit valves are not actuated from the front.
•
Set all components up so that it's easy to activate the switches and interrupters.
•
Follow the instructions about positioning the components.
© Festo Didactic 8129446
Switch off the working and control power before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Be aware of potential overtravel times for the drives.
403-1 System, Distributing Pro-Joining-Sorting Inline
CAUTION
WARNING
CAUTION
13