Pioneer PDP-LX608D Mode D'emploi page 49

Using the Electronic Programme Guide (EPG)(for DTV only)
Note
• Preset recording/watching begins immediately when presetting
operations are performed within three minutes of the start of the
programme.
• Presettings made using the EPG are automatically shown in the
scheduled table.
• Recording may fail because of watching restrictions imposed by
the CA module.
Priority rules for overlapped presettings
When preset TV programmes are overlapped, the following two
rules are used to determine higher priority. If more than one of the
two rules are met, the rules are applied in the order 1 then 2.
Rule 1: If two presettings are overlapped, the presetting with the
earlier start time is given a higher priority. If two presettings
are sequential, the last portion of the first programme or
the first portion of the second may not be recorded.
Rule 2: If presettings with the same start time are overlapped, the
presetting with the bigger list number is given a higher
priority.
Changing/cancelling TV programme presettings
Using the EPG
Use the following procedure to change or cancel programme
presettings using the EPG.
1 Press EPG.
• The EPG screen appears.
Select the desired preset programme (/, / then
2
ENTER or GREEN).
• A dialogue box appears.
• If you select "Yes", go to step 3.
• To quit the operation, select "No".
3 Select the preset programme ( or ENTER).
4 Select a programme number to edit (/).
• You can delete the preset programme by pressing the RED
button.
5 Edit the selected preset programme and update the setting
(ENTER).
• The screen alerts you if the preset programme being edited has
already started or finished.
6 When the setting is complete, press EPG to exit the EPG
screen.
Note
• When you want to stop recording/watching in progress that was
started by a programme presetting, for example, to change the
channel, an alert message appears indicating that the
presetting will be cancelled. In this case, you cannot cancel the
programme presetting using the EPG.
Using the menu
Use the following procedure to change or cancel programme
presettings using the menu.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Programme Timer" (/ then ENTER).
• The schedule table appears.
Programme Timer
No. Date Time
01
Mon.05.Jan 12:00-13:00
02
Every Day 14:00-15:00
03
Every Sun 14:00-15:00
04
Mon-Fri 14:00-15:00
05
Sat, Sun 14:00-15:00
06
07
08
09
10
5 Select a programme number to be edited (/).
• Delete the programme presetting (RED).
• Start editing (ENTER).
Adjust the desired item (/, /).
6
7 Press ENTER to complete the setting.
• The screen alerts you if the preset programme being edited has
already started or finished.
8 Press HOME MENU to exit the menu.
Changing priorities for overlapped presettings
You can change the priority order for overlapped preset
programmes to suit your preference.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Programme Timer" (/ then ENTER).
• The schedule table appears.
5 Select a programme to edit (/ then BLUE).
6 Select the position to move the selected programme
(/).
7 Now move the programme to the selected position by
pressing BLUE or ENTER.
Wed.24.Nov 12:34
Channel Info
001 ************
007 ***************
007 ***************
007 ***************
007 ***************
10
49
En