Changing The Brightness At Both Sides Of The Screen (Side Mask); Room Light Sensor; Blue Led Dimmer; Orbiter - Pioneer PDP-LX608D Mode D'emploi

Useful adjustment settings
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at both
sides of the screen.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Side Mask" (/ then ENTER).
4 Select "Brightness Sync." (/).
5 Select the desired parameter (/).
Item Description
Fixed
Always sets the same brightness for the grey side
(default) masks
Auto
Adjusts the brightness of the grey side masks
according to the brightness of images
Important
• The "Auto" setting adjusts the brightness of the side masks
according to the brightness of the screen and can reduce the
possibility of image retention.
6 Press HOME MENU to exit the menu.

Room Light Sensor

This function automatically adjusts the brightness of the display
panel in accordance with the brightness level of the viewing area.
For details, use the following procedure.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Room Light Sensor" (/ then ENTER).
4 Select "On" or "Off" (/ then ENTER).
Item Description
On Activates the Room Light Sensor function
Off
Deactivates the Room Light Sensor function
5 Press HOME MENU to exit the menu.
Note
• This function is disabled when "OPTIMUM" is selected on the
"AV Selection" menu.
• This function is not available when PC signals are received.
• As this function automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.

Blue LED Dimmer

You can adjust the brightness of the POWER ON indicator
depending on the brightness level of the viewing area. When "Auto"
is selected, the brightness of the indicator changes to "High", "Mid"
or "Low" to match the brightness level of the viewing area.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Blue LED Dimmer" (/ then ENTER).
4 Select "Auto", "High", "Mid" or "Low" (/ then ENTER).
5 Press HOME MENU to exit the menu.

Orbiter

This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Orbiter" (/ then ENTER).
4 Select "Mode 1" or "Mode 2" (/ then ENTER).
Item Description
Off Disables the Orbiter
Mode 1
Enables the display protection function for any
screen mode other than "Dot by Dot"
Mode 2 Enables the display protection function for all
available screen modes
5 Press HOME MENU to exit the menu.
• To cancel this function, select "Off" in step 4.
Note
• For the Dot by Dot mode, see Selecting a screen size manually on
page 53.
• This function does not operate when PC signals are received.
11
55
En