Use The Multiscreen Functions - Pioneer PDP-LX608D Mode D'emploi

Watching TV

Use the multiscreen functions

• Before operating with the remote control unit, make sure to select
the TV mode using its SELECT button. See Controlling other
equipment using the supplied remote control unit on page 69.
Splitting the screen
Use the following procedure to select 2-screen or picture-in-picture
mode.
Note
• Displaying a split screen for a long period of time, or for shorter
periods of time everyday, may result in image retention.
2-screen
Main screen
Picture-in-picture
Main screen
INPUT 5
P
Sub screen
Sub screen
TV/DTV
Press c to select the display mode.
1
Each time you press c, the display mode is switched among 2-
screen, picture-in-picture, and single-screen.
• In 2-screen or picture-in-picture mode, press
position of the two screens shown.
The left screen (in the 2-screen mode) or the larger screen (in the
picture-in-picture mode) is the active screen which will be
indicated by "z". The user is allowed to operate picture and sound.
• In picture-in-picture mode, press
small screen anti-clockwise.
2 To select the desired input source, press the appropriate input
source button.
If watching TV programmes, press P+/P– to change the channel.
06
to switch the
to move the position of the
23
En