Domo DO607ED Mode D'emploi page 47

5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
dôvod, prečo je deka nastavený tak, aby nožná zóna vždy vyhrievala o 5 °C viac ako na tele.
NASTAVENIE TEPLOTY (TEMP)
Teplotu vykurovania možno nastaviť stlačením tlačidla TEMP. Môžete si vybrať z 8 stupňov od
20 °C do 50 °C.
Body mode
5.3 Select setting:
· Stlačenie tlačidla TEMP spôsobí, že teplota bude blikať a môžete ju nastaviť.
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
· Stlačte +/- na zvýšenie alebo zníženie teploty.
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
· Ak nestlačíte tlačidlo, displej bliká a prikrývka sa zahreje na blikajúcu teplotu.
· Ak je teplota nastavená na "0", nezohrieva sa.
press "TEMP" "5" setting blink
RÝCHLE OHREV (RÝCHLY)
Stlačením tohto tlačidla QUICK sa celá deka udržiava na maximálnou teplotu
(krok 8) a po dobu 30 minút.
Týmto spôsobom môžete kedykoľvek a pri akomkoľvek nastavení deku zapnúť
. Ak zvolíte QUICK, nezáleží na tom, čo ste predtým vybrali a budú vždy plné
vykurovanie. Po týchto 30 minútach sa nastavenia automaticky vynulují a vráti
New blenket item develop plan sa k predchádzajúcemu.
time
ČASOVAČ (TIMER)
n condition, press【TIMER】button，the time icon will blink（fist set hour，then
then press【+】button，increase
Ak časovač nie je nastavený, deka hreje, kým ju nevypnete. Stlačením tlačidla TIMER môžete
ton, time will decline until 0 minute. 0 minute mean machine is non-fixed time
časovač nastaviť na 12 hodín. Po uplynutí nastaveného času sa políčko automaticky vypne.
· Stlačením tlačidla TIMER bude na displeji blikať hodnota minút. Pomocou tlačidiel +/-
nastavte minúty, Ak nestlačíte budú nastavené blikajúce minúty.
press "+"increase time
time icon blink
· Môžete tiež nastaviť hodiny pomocou tlačidla +, aby ste mohli pokračovať, ale je to
jednoduchšie a rýchlejšie nastaviť samostatne. Opätovným stlačením tlačidla TIMER
ating function
n condition，press【QUICK】button，machine into "quick heating mode" works
rozblikajú hodiny a tlačidlami +/- nastavíte. Ak nie je stlačené žiadne tlačidlo, vyberie sa
setting and 30 minutes, in time will back to initial setting.
blikajúcí čas.
ČISTENIE A ÚDRŽBA
· Pred každým čistením vždy vytiahnite zástrčku zo zásuvky.
· Menšie škvrny možno vyčistiť handričkou alebo vlhkou hubkou. V prípade
potreby možno čistiť aj tekutým pracím prostriedkom.
n on condition，when key part is broken, CPU will exzmine the reason,the machine
· Pozor: túto dečku nečistite pomocou chémie.
nfo on LCD and open backlight, meantime all button are no function.Thyristor close
short circuit will output) blanket off power.
www.domo-elektro.be
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
3. Control panel looks
Body mode
Feet mode Body and feet mode
5.3 Select setting:
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
press "+" incease settings
press "TEMP" "5" setting blink
press "-" decline settings
】Button:Set function mode-body heatingn mode；feet heating mode，body and feet mode
【MODE
3 page of 4 pages 【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
New blenket item develop plan
3. Control panel looks
5.4 Selection time
In any turn on condition, press【TIMER】button，the time icon will blink（fist set hour，then
time until set minute）then press【+】button，increase the longest time-12
press【-】button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink press " - " decline time
5.5 Quick heating function
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
In any turn on condition，press【QUICK】button，machine into "quick heating mode" works
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
with 8 heating setting and 30 minutes, in time will back to initial setting.
】Button:Set function mode-body heatingn mode；feet heating mode，body and feet mode
【MODE
【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
5.6 In any turn on condition，when key part is broken, CPU will exzmine the reason,the machine
display error info on LCD and open backlight, meantime all button are no function.Thyristor close
output(Switch short circuit will output) blanket off power.
New blenket item develop plan
5.4 Selection time
In any turn on condition, press【TIMER】button，the time icon will
set minute）then press【+】button，increase
press【-】button, time will decline until 0 minute. 0 minute mean m
Feet mode
Press "TIMER" time icon blink
5.5 Quick heating function
press "+" incease settings
press "-"
In any turn on condition，press【QUICK】button，machine into "quic
3 page of 4 pages
with 8 heating setting and 30 minutes, in time will back to initial se
2 page of 4 pages - - 4
New blenket item develop plan
5.6 In any turn on condition，when key part is broken, CPU will exzmi
display error info on LCD and open backlight, meantime all button are
output(Switch short circuit will output) blanket off power.
hours; time until
press "+"increase time
2 page of 4 pages - - 4
New blenket item develop
Body and feet mode
press "+"increase time
decline settings
the longest time-12 hours;
4 page of 4 pages
press " - " decline time
DO607ED
time until the
pre
47