Installation; Installing/Replacing The Lamp - EuroLite TC-150 Mode D'emploi

INSTALLATION

Installing/Replacing the lamp

For the installation, you need one of the following lamps:
OSRAM HCI-T150/NDL PRO 6000h 150W G12
Topspot HIT 150W G-12 6000h 4200K nw
GE CMH 150/T G12 6000h 830 3000K
OMNILUX ODM 150W G-12 6000h 4200K
PHILIPS CDM-T 150W/830 G12 3000K
OSRAM HSD 150/70 G-12 7000K 2000h
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp or check the operating hour meter (if available) regularly and replace the lamp in
time.
Keep exchanged lamp in a protective container and remove accordingly.
During the operation, the lamp reaches temperatures of up to 600° C.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 10 minutes).
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
21/52
(8) Power supply
(9) Fuseholder
(10) Housing screws
(11) DIP-switches
(12) Control LED
(13) DMX-Out socket
(14) DMX-In socket
(15) Lamp system
Best.-Nr. 91201794
Best.-Nr. 91201797
Best.-Nr. 91201800
Best.-Nr. 91201805
Best.-Nr. 91014045
Best.-Nr. 89101910
00026408.DOC, Version 1.3