Publicité
Les langues disponibles
Les langues disponibles
Description
Your weed brush has been designed to remove weeds from between tiles and on
patios.
1.
On/off switch
2.
Unlocking
3.
Main handle
4.
Steering handle
5.
Telescopic tube
6.
Protective cover
7.
Brush
8.
Wheel
9.
Knob
10. Screw
11. Compression fitting with
locking ring
Assembly
Assembly and adjustment of the steering handle (fig. A)
Mount the protective cover (4) on the device, as shown in drawing A.
Attach the steering handle to the shank using both knobs (9).
The steering handle can be adjusted as follows to acquire a proper balance:
Unscrew both knobs (9)
Adjust the handle to the required height.
Carefully tighten the knobs once more.
Assembly of the telescopic tube (fig. A)
Turn open the locking ring of the compression fitting (11) and slide it back over
the cable and the bottom telescopic tube (5).
Now insert the bottom telescopic tube (5) into the inner section of the
compression fitting. Attention: there is a lug inside the compression fitting,
there is a groove in the bottom telescopic tube. The lug must engage with the
groove!
Slide the telescopic tube into the compression fitting until the lug passes a stop
in the groove. Now, the telescopic tube can no longer be slid out of the
compression fitting.
23
Publicité
