Publicité
Les langues disponibles
Les langues disponibles
Electrical safety
1.
Before use, always check to ensure that the socket you wish to use provides
the Voltage and Hertz detailed on the weed brush's specification plate.
2.
Preferably connect the weed brush to an electrical group that is protected by
an earth leakage circuit breaker of max. 30 mA.
3.
Only use the following types of extension lead: H05VV-F, H05RN-F en H05RR-
F.
Safety warnings
When you are using electrical devices, please read the following safety instructions
to avoid electric shocks, injury or burns. Read the following carefully before using
the device.
1.
Keep the working area clean. Too many obstacles could lead to accidents
and injuries.
2.
Be aware of your surroundings. Electrical devices should not be used in the
rain or in damp conditions or in the vicinity of flammable substances or gases.
Make sure you have sufficient light.
3.
Keep children and visitors out of the vicinity of the working area. They
should not touch the device or the extension cable!
4.
Adapt your clothing and hairstyle to your activities and do not wear loose
clothing or hair, long chains or shawls when using devices with moving parts.
Protective gloves and shoes and optionally goggles, ear mufflers and a dust
mask are also recommended.
5.
Use the appropriate tools and do not use the device for tasks for which it is
not designed. Do not make any changes to the device. Inappropriate use and
making changes to the device will invalidate the warranty and release the
supplier of any liability!
6.
Always put the plug into the socket and then switch the device on in
order to avoid unintended operation.
7.
Make sure that you stand firm and do not overstretch yourself to reach an
awkward spot with the device.
8.
Never force the device; it works best and most safely if used in the
appropriate manner.
9.
Always be alert and use your common sense when working. Do not use the
device when you are tired.
10. Be careful with the electric cable. Do not pull it, over-run it or trip over it.
Keep the cable away from heat, oil and sharp edges.
11. Protect yourself from electric shocks and prevent bodily contact with
earthed surfaces such as pipes, radiators, etc.
12. Clear tools away immediately after use, to a dry, high or enclosed space
out of the reach of children.
13. Treat tools with care. Keep them clean and in good condition and replace
any worn parts promptly. Check the device and the cable regularly and allow
competent persons to carry out any maintenance. Never use the device if a
part is damaged.
14. Always remove the plug from the socket when the unit is not in use.
22
Publicité
